Toshiba Electronic Devices & Storage Corporation has launched "TLX9909," a photovoltaic-output photocoupler for solid-state relays (SSRs) in automotive equipment. The new product enables adjustment of turn-off time with an external circuit. Relay units for automotive equipment are required to offer a longer service life, smaller sizes and higher reliability.
Toshiba’s TLX9909 photovoltaic-output photocoupler drives external high-voltage MOSFETs in automotive solid-state relays, with turn-off behaviour set by the external circuit.
(Source: Toshiba)
The contacts of mechanical relays are subject to wear and contact failure with long-term use, so mechanical relays are increasingly being replaced by SSRs, which have no moving contacts and use semiconductors for switching.
TLX9909 is a photovoltaic-output photocoupler that directly drives the gate of a discrete MOSFET using electric power generated by a photodiode array when it receives light from the input-side LED. As it does not require an isolated-side power supply or a charge-pump circuit, it helps reduce the number of components and contributes to smaller system size and higher reliability.
Although TLX9909 is configured without a built-in control circuit, it maintains an open voltage[3] of 13.5V (min), equivalent to that of the current TLX9910, which does have a built-in control circuit. By selecting an external gate discharge circuit, users can adjust the turn-off time to suit the connected MOSFET and application, bringing greater flexibility to gate control design. In addition, while the current TLX9905 and TLX9906 offer an open voltage of 7V (min), TLX9909 offers a higher open voltage of 13.5V (min). This makes it easier to secure the gate drive voltage for high-voltage power MOSFETs, expanding the range of MOSFETs that it can be combined with.
Combining TLX9909 with an external high-voltage power MOSFET allows flexible configuration of high-voltage, high-current switching circuits, which can be difficult to achieve with photorelays limited by the ratings of their built-in MOSFETs. The availability of both TLX9909, which emphasizes adjustability through external circuits, and TLX9910, which has a built-in discharge circuit, realizes product selection to meet system requirements, such as flexibility in circuit design and the number of components.
The new product complies with AEC-Q101, the reliability standard for automotive electronic components, and is suitable for SSR applications in automotive equipment such as battery management systems (BMS), on-board chargers (OBC), and inverter units.
Toshiba will continue to expand its lineup of photocoupler products that contribute to improving the reliability of automotive and industrial equipment.
Follow us on LinkedIn
Have you enjoyed reading this article? Then follow us on LinkedIn and stay up-to-date with daily posts about the latest developments on the industry, products and applications, tools and software as well as research and development.
It goes without saying that we treat your personal data responsibly. Where we collect personal data from you, we process the data in compliance with the relevant data protection regulations. More detailed information is available in our privacy policy.
Consent to the use of data for advertising purposes
I consent to the use of my email address to send editorial newsletters by Mesago Messe Frankfurt GmbH, Rotebühlstr. 83-85, 70178 Stuttgart, Germany including all of its affiliates within the meaning of Section 15 et seq. AktG (‘Mesago’). I have viewed lists of each group of affiliates here for the Mesago. The content of the newsletter covers the products and services of all of the companies listed above including, for example, trade magazines and specialist books, events and exhibitions and event-related products and services, printed and digital media products and services such as additional (editorial) newsletters, competitions, lead campaigns, online and offline market research, technical web portals and e-learning courses. If my personal telephone number has also been collected, it may be used to send offers for the aforementioned products and services from the above companies, as well as for market research purposes. If I wish to access protected content online on portals of Mesago including its affiliates within the meaning of Section 15 et seq. AktG, I must register with additional data in order to access that content. In return for this free access to editorial content, my data may be used in line with this declaration of consent for the purposes described herein.
Right to withdraw consent
I am aware that I can withdraw this consent at any time with future effect. My withdrawal of consent does not affect the lawfulness of processing performed based on my consent before its withdrawal. If I wish to withdraw my consent, I can send an email to Mesago at privacy@mesago.com. If I no longer wish to receive individual newsletters to which I have subscribed, I can also click on the unsubscribe link at the bottom of a newsletter. I can find more information on my right to withdraw, how to exercise this right and the consequences of my withdrawal in the Privacy policyEditorial newsletters section.