SURGE PROTECTIONLittelfuse launches high-power TVS diodes for high-voltage DC applications
From
Littelfuse
2 min Reading Time
Littelfuse, Inc. has announced the AK-FB and AK-A Series of High-Power TVS Diodes, engineered to protect high-voltage DC (HVDC) power electronics from damaging overvoltage transients while delivering industry-leading, latch-up-free clamping performance.
Littelfuse’s AK-FB and AK-A TVS diode series provide high-current surge protection for high-voltage AC and DC lines.
(Source: Littelfuse)
Engineered for the surge and switching-transient demands on modern HVDC systems, the new TVS diodes address a critical challenge in high-power design: protecting costly, sensitive solid-state electronic switches based on SiC, GaN or Si, without exceeding their absolute maximum ratings. The AK-FB Series uses controlled-foldback technology from Littelfuse to maintain a near-constant, ultra-low clamping voltage during transient events while maintaining a near-constant, ultra-low clamping voltage during transient events while ensuring that the minimum snapback voltage (VSB) remains at or above the Reverse Standoff Voltage (VR), eliminating DC-supply latch-up risk. This same benefit extends to AC applications as well. (See the video.)
The AK-A Series, meanwhile, is designed to maximize power dissipation across its rated current range. Its clamping voltage, while higher than the AK-FB Series, remains well below that of conventional TVS diodes and metal oxide varistors (MOVs), giving designers a wider margin from latch-up while still delivering ultra-low clamping performance.
"The AK-FB and AK-A Series were designed specifically for the demands of HVDC applications," said Ben Huang, Director Product Management, SBU, Littelfuse. "They enable high-power-density HVDC designs and help protect costly, sensitive components, including SiC, GaN or Si, from damage caused by overvoltage transients."
The AK-FB Series is available in 3, 6, 8, and 10 kA peak pulse current (IPP) ratings, while the AK-A Series is available in 1, 3, and 6 kA ratings, giving designers a broad range of surge-current options within an identical footprint across the AK Series family. For example, in a 430 V-rated device at 6,000 A peak pulse current, the AK6-430C-FB clamps at just 580 V, compared to 625 V for the existing standard-clamp AK-Y Series from Littelfuse, demonstrating the meaningful reduction in clamping voltage the new series delivers.
Follow us on LinkedIn
Have you enjoyed reading this article? Then follow us on LinkedIn and stay up-to-date with daily posts about the latest developments on the industry, products and applications, tools and software as well as research and development.
It goes without saying that we treat your personal data responsibly. Where we collect personal data from you, we process the data in compliance with the relevant data protection regulations. More detailed information is available in our privacy policy.
Consent to the use of data for advertising purposes
I consent to the use of my email address to send editorial newsletters by Mesago Messe Frankfurt GmbH, Rotebühlstr. 83-85, 70178 Stuttgart, Germany including all of its affiliates within the meaning of Section 15 et seq. AktG (‘Mesago’). I have viewed lists of each group of affiliates here for the Mesago. The content of the newsletter covers the products and services of all of the companies listed above including, for example, trade magazines and specialist books, events and exhibitions and event-related products and services, printed and digital media products and services such as additional (editorial) newsletters, competitions, lead campaigns, online and offline market research, technical web portals and e-learning courses. If my personal telephone number has also been collected, it may be used to send offers for the aforementioned products and services from the above companies, as well as for market research purposes. If I wish to access protected content online on portals of Mesago including its affiliates within the meaning of Section 15 et seq. AktG, I must register with additional data in order to access that content. In return for this free access to editorial content, my data may be used in line with this declaration of consent for the purposes described herein.
Right to withdraw consent
I am aware that I can withdraw this consent at any time with future effect. My withdrawal of consent does not affect the lawfulness of processing performed based on my consent before its withdrawal. If I wish to withdraw my consent, I can send an email to Mesago at privacy@mesago.com. If I no longer wish to receive individual newsletters to which I have subscribed, I can also click on the unsubscribe link at the bottom of a newsletter. I can find more information on my right to withdraw, how to exercise this right and the consequences of my withdrawal in the Privacy policyEditorial newsletters section.